Mileage
210,828
Service Date
1/13/2022
Services Performed
- Upon inspection tech removed front wheels and found that both front calipers are hanging up and brake pads are down to less than 1mm. Rotors are complete ground up, and are not machine able. Truck has aftermarket calipers and rotors. These are a eight piston caliper and cross drilled rotors. Needs new calipers, rotors and brake pads.
- #2 LOF – Lube, Oil, Filter (Full Service)
- Inspection completed. See attached worksheet
- Remove and replaced the upper and lower ball joints and reassembled.
- #5 DRAG LINK and CONNECTION TIE ROD – Remove & Replace – F250 Super Duty,F350 Super Duty
- -Removed the front wheels and brake calipers. Removed the rotors and replaced with new and applied a non directional finish to help the new pads break in correctly. Cleaned the caliper mounting slides and reassembled with new front calipers & brake pads with anti-squeal to the backing. Flushed and bled the front brake hydraulics as needed. Repacked the front wheel bearings and replaced new seals as needed. Torqued the calipers and wheels to specs then road tested. Burnished in the front pads on the road test. The brakes work good.
- #7 ALIGNMENT-Perform Front End Alignment, (does not include any parts or cams for alignment)
- Freight
- #8 ENGINE BLOCK HEATER – Remove & Replace – Diesel
Jeff W. gave our service a 5 star review on 1/13/2022